Port Carling Drywall & Painting Services

On arrival we review framing, layout, openings and how new walls will meet existing surfaces so fastening and seams are planned before board goes up.

Prep: clear a working path and stage materials so the hang can move efficiently. On additions and new builds we confirm the substrate is ready to hang.

Work: hang board on walls and ceilings with proper fastening and joint layout. Tape every seam and corner, then build compound in thin coats—bedding, fill and finish—with drying time between coats.

Finish: sand to a smooth, even plane so seams and fasteners stay hidden under paint. Inside and outside corners are kept straight.

Cleanup: scrap and sanding dust are bagged; the room is swept and wiped for the next step.

You receive hung, taped and finished drywall that is ready for primer and paint.

On arrival we confirm which walls, ceilings, trim, doors and baseboards are included, along with colour and sheen, and what needs protecting in the room.

Prep: floors and furnishings are covered, switch plates come off, small holes are filled, rough spots are sanded, dust is wiped, and stains or bare patches are spot-primed.

Work: cut in at ceilings, corners and trim, then roll open fields in even coats. When ceilings are included they are painted first, then walls, then trim.

Finish: coverage and cut lines are checked under good light and touched up before masking is removed.

Cleanup: plates go back on, protection comes out, and the room is left tidy.

You receive even interior coverage with clean lines on the surfaces we agreed to paint.